Heavy Duty Diagnostic

  How to perform: Fuel Rail Pump Solenoid Test using Caterpillar ET Software ? Purpose: The Fuel Rail Pump Solenoid Test function can be used to verify the operation of the fuel rail pump solenoid. This test provides a method for determining whether or not an open circuit or short circuit is present. -Connect CAT ET Software , Read More: How to Connecting Caterpillar ET Software to the ECM -Open Menu: “Diagnostic”- “Diagnostic Test” – “Fuel Rail Pump Solenoid Test” -Click on “Power All” or “Start” and wait the process until completed (Mode: powered) -On tab “Test Results” is Not OK (*Short), indicates that the Fuel Rail Pump Solenoid is damaged/shorted. NOTE: -This test identifies an open circuit or a short circuit for the Fuel Rail Pump Solenoid. The test activates the solenoid while the engine is not running. A good solenoid will create an audible click when the solenoid is activated. CAT ET indicates the status of the solenoid as “OK”, “Not OK (Open)”, or “Not OK (S

  I had bought a BMW ICOM NEXT with HDD. I connect the 500G software HDD with my computer via USB cable. When the connection is ok, the indicator light of HDD flashes for a while and goes off. The system prompts “USB device not recognized” and “Please insert a disk into Removable Disk (G:)”. What’s wrong with the HDD? Autonumen.com engineer replied: The BMW ICOM 500G Software HDD is a built-in disk. Please remove the original hard driver of the computer and insert the SP269-DS HDD to start.

  Purpose: The Product Status Report feature allows users to capture the status of a machine or engine at a specific moment in time. Data loaded from the ECM is compiled in the Product Status Report and includes parameters, user comments, and user-selected diagnostics and/or configuration information. The report is automatically saved once it has been created and may be viewed immediately or at a later time. -Connect Caterpillar ET Software , Read More: How to Connect Caterpillar ET Software to the ECM -Open Caterpillar ET Software, click on Menu “Information – Product Status Report”. -Click on Create Report, after the selected information is loaded from the ECM, the Product Status Report is displayed and saved in the XML format. Click Close Report to return to the Product Status Report screen. Click Save As to save the Product Status Report with a different name, to a different location, or in a different format (for example, PDF). -Example of Product Service Report